If you detect an oil leak from the front, middle or rear of the engine on one of the models listed below, it’s probable that the cast aluminum engine block may be porous in spots. To correct the problem, seal the leak with J-B Weld or 3-Bond-coated sealing bolts, depending on the location of the leak.

Applicable Models:
• 1998-2003 Accord V6;
• 1999-2003 Odyssey; and
• 2003 Pilot.

Tool Information:
• VTEC System Test Tool, P/N 07AAJ-PNAA100; and
• Adapter Hose, P/N SUNAT77.

Fig. 4

Note: For some problems, the VTEC system test tool can be used to pressure-check the engine block for oil leaks. The tool consists of a gauge with a regulator, hose and coupler. See Fig. 4.

Required Materials:
• J-B Weld, P/N 8265-S (commercially available)
• Powdered Leak Detector, P/N 20165 (Kent Industries, 800-654-6333)

Parts Information:
• Timing Belt Adjuster Pulley Bolt (except 2003 Accord V6), P/N 14551-P8A-999;
• Timing Belt Adjuster Pulley Bolt (2003 Accord V6 only), P/N 14551-RCA-A01;
• Engine Side Mount Bracket Bolt, P/N 95801-10085-99;
• Transmission Mountin...